· Designed for uniform circulation of hot air in the drying chamber. Electrical / Steam / Oil Heating mode.
· Inside surface is painted with heat resistant aluminum paint and out side with synthetic enamel.
· cGMP models with SS 316 Construction, Single page design, coving
coroners, fully washable type models available.
· Inside of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.
CONSTRUCTION
EXTERNAL: 2MM THKINTERNAL: 2MM THKMOC: cGMP
SURFACE FINISH
EXTERNAL: Buffed to 150 grit matt finish INTERNAL: Buffed to 220 grit mirror finish.
INLET & OUTLET:
All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet.
DOOR
Doors at provided at the front and / or rear side of the dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.
AIR CIRCULATION
Air circulation is done by specially designed recirculation blowers inside the dryer. The blower capacity, static & design depends on the size and model of dryer.
HEATING
Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers.
TEMPERATURE CONTROL
Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
TRAYS
Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish. Trays are also available in aluminium / Polypropylene / Frp/ M.S. galvanized as per clients requirements.
TROLLEY:
Trolley is provided in the dryers to accommodate trays in it. Trolley trucks are used to load and unload the trays into the dryer.
CONTROL PANEL:
Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.
TECHNICAL SPECIFICATIONS
|
MODELS
|
TD-12
|
TD-24
|
TD-48
|
TD-96
|
TD-192
|
|
Loading capacity
|
12 Trays
|
24 Trays
|
48 Trays
|
96 Trays
|
192 trays
|
|
External Dimensionin mm
|
W D H
1370 X 530 X 940
|
W D H
1370 X 940 X 940
|
W D H
1980X1020X1880
|
W D H
3320X1900X1880
|
W D H
3320X1900X1880
|
|
Internal DimensionIn mm
|
840 X 430 X 840
|
840 X 860 X 840
|
1020 X930 X1830
|
1960 X930 X1830
|
1960 X930 X1830
|
|
No of Doors
|
One
|
One
|
One
|
Two
|
Two
|
|
No of Blowers
|
One
|
Two
|
One
|
Two
|
Four
|
|
No of motors/H.P.3 PHASE 415 VOLTS.
|
1/0.5 H.P.3
phase 415 volts.
|
1/0.5 H.P.3
phase 415 volts
|
1/1 H.P.3
phase 415 volts
|
2/1 H.P.3
phase 415 volts
|
Four/1 H.P.each3
phase 415 volts
|
|
Electrical Heating Load for100°C/200°C/300°C
|
3kw/6kw/9kw
|
6kw/9kw/12kw
|
9kw/15kw/18kw
|
15kw/21kw/27kw
|
36kw/42kw/48kw
|
|
Steam Heater No. of coils.
|
2
|
2
|
2
|
2
|
2
|
|
Steam Pressure
|
3.3 kg/cm2
|
3.3 kg/cm2
|
3.3 kg/cm2
|
3.3 kg/cm2
|
3.3 kg/cm2
|
|
Steam consumption
|
25 LBS/hr
|
45 LBS/hr
|
60 LBS/hr
|
80 LBS/hr
|
120 LBS/hr
|
|
Insulation
in mm100°C/200°C/300°C
|
50/75/75
|
50/75/75
|
50/75/75
|
50/75/75
|
50/75/75
|
|
No of Trolleys
|
Rack System
|
Rack System
|
One
|
Two
|
Four
|
|
Tray Size
|
812X 406 X 31
|
812X 406 X 31
|
812X 406 X 31
|
812X 406 X 31
|
812X 406 X 31
|
|
Trolley Dimension
|
Fixed Racks
|
Fixed Racks
|
840X960X1780
|
840X960X1780
|
840X960X1780
|
